- Model NO.: YL-ATPM-039
- Voltage: 380V, 50Hz
- Worktable In And Out Motor Power: 550W
- Shafts Open and Close Motor Power: 0.4kw
- Worktable Size: 86cm, with 10-19PCS Tube Clamp (Can Be Customized)
- Polishing Shafts Speed: 1800r/Min
- Transport Package: Wood Case
- Origin: China (Mainland), Guangdong
- Machine Weight: 3 Ton
- Main Motor Power: 11kw*2
- Worktable Swing Motor Power: 0.37kw
- Pipe Clamp Rotation Motor Power: 0.37kw*2
- Polishing Shafts Size: 103cm*50mm (L*W)
- Trademark: Yi-Liang
- Specification: 6m*1.88m*1.7m (L*W*H)
- HS Code: 8460902000
|Power||Main motor: 11KW*2|
|Worktable in and out motor: 550W|
|Worktable swing motor: 0.37KW|
|Shafts open and close motor: 0.4KW|
|Pipe clamp rotation motor: 0.37KW*2|
|Worktable size||86cm, with 10-19pcs tube clamp (can be customized as your request.)|
|Polishing shafts size||103cm*50mm (L*W)|
|Polishing shafts speed||1800r/min|
|Machine size||6m*1.88m*1.7m (L*W*H, can be customized as your request.)|
|Machine weight||3 ton|
1. Most of tube polishing machine in the market now is pipe conveying polish machine, which is combined by centreless polishing machine. Except for the polishing wheel, there are also rubber wheel (use to fixed the pipe, and push it to the polishing wheel) and pallet (use to support the tube).
(1) In the polishing process, we usually coated polishing wax and abrasive sand on the polishing wheel surface to help grinding. Because the high temperature during polishing, these abrasives will stick to the rubber wheel surface, which make secondary damage to the following tubes.
(2) And the pallet will occur some small collisions inevitably during support the pipes, which will leave some flaws and affect the products quality.
2. In summary,the above machine will influence the tubes polishing quality by itself. But if you use YL-ATPM-039 double shaft round pipe surface polishing machine, the tubes will only contact the polishing wheels, and won't occur excess scratches, which can better to achieve high mirror effect. And the pipes are front and back to contact the polishing wheels, so the final straight wire drawing effect is more beautiful and more high-end.
We will customize the machine size and tube clamp according to your products requirement. For example, tube both ends with opening, we will design a tapered clamp to hold; pipe both ends without opening, we will make a circle holder to fixed.
And we will customized the most suitable polishing solutions as your request.